Arcane Pendant - Shuiro Cosplay ✨

Beschreibung

The pendant from Arcane show that Ekko gave to Jinx.Parts and Materials:1.5mm diameter x 25mm locating pins x2502 adhesiveThrough four tests, I found the model prints perfectly under the following conditions:Base warping (Apply a small amount of adhesive or heat the build plate to 50-70 degrees)Fitting issues (Due to varying shrinkage rates of different materials, slightly enlarge the inner frame by 0.4%)502 adhesive application issues (First, adhere the outer frame, stopper, and locating pins, then insert the spacer and finally assemble the main body. This effectively avoids adhesive sticking issues)Color issues (I ran out of silver filament, so I used gray instead. Gray doesn't look very good; silver is recommended. The filigree section looks best with dark filament, otherwise it appears dull. Raised details look better)