Hydrogen Generator
- 13 Aufrufe
Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.
Auf Cults3D ansehen ↗Beschreibung
Safety: First off, a hydrogen generator can be very dangerous if you are not taking the proper safety considerations.The tube producing hydrogen must be kept away from flames. I always keep a five-gallon bucket with water to place the tube in (as an added safety precaution). If safety precautions are not taken properly there is a potential risk of blowing up and sending PVC shrapnel everywhere. So safety glasses are required. Hydrogen is a useful tool but is very dangerous. You have been warned. Disclaimer: If you make a hydrogen generator from what I provided, I take no responsibility if you hurt yourself, others, or destroy property. Make at your own risk. I plan to use this for an experiment to either run my generator off of hydrogen or create a hybrid system to see if my generator runs longer. YouTube: https://youtu.be/7NqaH3yWsJw I designed a hydrogen generator that I can run on my solar panels or on my solar generator. I used stainless steel washers and each 2 in washer alternated from positive to negative. I 3D printed a bolt to hold all the washers together. The hydrogen chamber is 4 inch PVC and the safety chamber is 2 in PVC They are held together with 2 3D printed pipe holders and there is a 3D printed stand. I use potassium carbonate as my catalyst.
About this model
Hydrogen Generator is a kostenlos 3D model in the Sonstiges category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.