Jet Engine Component ; Axial Compressor by Motoo Kondo

Beschreibung

I have made the cut model of about many kinds of jet engines.The basic component was simplified from size restrictions of my 3D printer.Then, it decided to expand each component and to create the actual model which gives structure explanation.This is the "Axial Compressor" model.The following explanable elements were incorporated.(1) Variable Guide Vane Pitch change is possible by a linking lever.(2) Blade It has the "Dovetail Root" retained by the Retainer.(3) Disk It is called "Wing Disk" with the labyrinth air seals.(4) Stator Brazing structure is reproduced.(5) Assembly Jig The Structural interrelationship of the above-mentioned element is reproduced. From now on, other components, such as a Turbine, Propeller and etc. will be manufactured. Download files includes;-files: STL Files (15 items) STL file name: "ws" of last 2 digits means "With Support" which special designed. -Assembly-Photos (PDF(ZIP) format) Purchase Parts Information;-Copper(Cu) Plate 0.5mm thick for Blade Retainers - See Photo -Screws Screws, Washer and Nut; M2 and M3 - See Photo Assembly Points- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc.) is needed and perseverance too. Total Net Print Time: Approx. 23HR- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. 3D printing settings Raft, Support, Layer Height, Infill: Depending on your…