Propane Hanger Set

Propane Hanger Set

Kostenlos STL Cosplay & Requisiten
  • 19 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

When using a 1lb propane refill kit, having a 15lb tank upside down is natural... Right?? As a house hold we bought a 1lb propane refill set, nice shhhtuff lol. Wasn't wanting to drag things outside to fill takes, so made a hook and holder to hang it The pins should be strong enough to put on the ground, didn't want to cut the rope by tying it off to the tank and it's constant length. Required Hardware 1 M5 Nut 1 M5 Screw ~14 mm 5 Length of strongish rope Installation Guide Print parts Putting the nut into place, glueing it in would be reccommended Put on tank and use screw to hold it into place Tie one side of 4 of the rope onto each pin. Put the handle at a comfortable distance, tying each of them off while doing so

About this model

Propane Hanger Set is a kostenlos 3D model in the Cosplay & Requisiten category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle