OO/HO Scale Break Down Train

Beschreibung

The break down train from Thomas the tank engine for Ho/OO scale, the model was made by me using reference images from the Thomas Wiki. ADDED PARTS ARE NEEDED 1.5MM by 2mm chain is recommended, as well as 4mm round jump rings, these can be purchased on amazon, they are not terribly expensive however they are needed to complete the model so please keep this in mind! IF YOU NEED TO TIGHTEN THE SPOOLS The spools may print undersized, so they won't have enough friction to hold their positions correctly. if this happens, scale the Spool and Spool Pin to desired lengths until the desired tension/friction is met. there is some flex in the main body to allow for this, however, if the parts are made too large they will not fit please account for this when sizing!! (you can also use jump rings or O rings I recommend O rings as spacers, just make the Pin longer to accommodate the spacer) if anyone needs help to figure out how to thread the chain I can try to explain and try to make a diagram!! 2 Diagrams have been added. Option 1 mimics the way a normal crane would work. thread the bottom chain through the spool and make a tight loop around it and then through the boom arm to the hook. for the top spool thread it through the spool as before, then thread it as shown, wrapping around the tensioner Option 2 is (from what I can tell) supposed to be show accurate. Thread the Bottom spool as stated in option 1, the second spool is trickier (and I don't fully remember how I did it I'll try to…