Carnage

Beschreibung

Feel free to leave a comment or a like if you like the print Instructions You can resize, but take care not to modify the Z axis. Print with 100% fill and a layer height of 0.08mm, with a base layer of 0.16mm. The model measures 105.8 × 230mm. You can print with higher layer heights below the base thickness of 0.4mm. The maximum thickness allowed is 2.64mm and the actual thickness is 2.32mm. Filaments used: - #c00d1e - PLA BambuLab Basic Red Transmittance: 4 - #000000 - PLA BambuLab Basic Black Transmittance: 0.6 - #3d4d5b - PLA WANHAO Matte Anthracite Grey Transmittance: 0.6 - #ffffff - PLA BambuLab Basic Jade White Transmittance: 5 This print uses 4 different filaments. Filament changeover instructions: Start with BambuLab Basic Red - At layer no. 8 (0.72 mm), change to BambuLab Basic Black - At layer no. 17 (1.44 mm), change to WANHAO Matte Gris Anthracite - At layer no. 24 (2 mm), change to BambuLab Basic Jade White for the rest of the print run.