CTRL.3 Knob Guard for Teradek RT

CTRL.3 Knob Guard for Teradek RT

Kostenlos STL Sonstiges
  • 16 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

Protect the focus knob of your Teradek RT CTRL.3 handunit from bumps and accidental adjustments when resting on a surface or hanging on your hip. You will also need 2x M2.5-0.45 x 25 socket cap screws (https://www.fmwfasteners.com/collections/m2-5-0-45-socket-cap-screws-12-9-alloy-plain-din-912/products/m2-5-0-45-x-25-socket-cap-screw-12-9-alloy-plain-din-912). To install, remove the existing screws on the back of the handunit. Slot the heads of the new screws into the side of the guard and then use a long M2 hex driver through the top holes. Alternate tightening both screws evenly until snug. Do not over-tighten. I made this for my own personal use as an owner/operator, please use it in the same manner. Thanks.

About this model

CTRL.3 Knob Guard for Teradek RT is a kostenlos 3D model in the Sonstiges category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle