Magic Retro Card boxes V2 - Toploader Collection - Printed Layers Aus

Beschreibung

Full collection of the Toploader Magic The Gathering Retro card boxes - 50/100/150/200/300/450 -------------------------------------------------------------------------------------------------------------------------------- Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged! -------------------------------------------------------------------------------------------------------------------------------- Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box. Really easy to print, best to have a PEI textured surface with glue. Suggested Filament: PLA+ (DO NOT USE SILK) Layer Height: 0.2mm Nozzle: 0.4mm Infill: However you please but I use 25% progressive halved every 10mm (max 5 times) Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing Speed: 150mm, 50% on bottom and top layers Cooling: yes Supports: Not required Max angles: 45 Degrees -------------------------------------------------------------------------------------------------------------------------------- Sizes: 50 Cards - 88mm x 94mm x 115mm 100 Cards - 166mm x 94mm x 115mm 150 Cards - 244mm x 94mm x 115mm 200 Cards - 166mm x 178mm x 115mm 300 Cards - 244mm x 178mm x 115mm 450 Cards - 244mm x 262mm x 115mm…