MyRCCar WRC Wheels 1/10 Complete, 5 Rims, 4 tires On-Road RC Car Wheels by Dlb Five

Beschreibung

My Store is Closed. Design not on sale here. Do not buy if you are allowed. The rim is quite the "official" one, with 52mm diameter and 26mm wide. Sourced tires should fit. I called it 0 offset as is the same one as the carson wheels I have. The distance from the ext of the rim to the surface where the 12mm HEX relays is 10mm. I created also the +2 +4 -2 -4 offset versions of the rim which are available in this publication. So you will find here 5 different offset rims, but also 4 different types of tires. TARMAC TIRES 65mm 1Wall:The Tarmac Tires are something like Michelin Pilot and the measures are quite real, I mean those 65/20 - 19 would correspond to a 65mm diameter, 20mm of contact zone and 19" rims. Total width of the tire is 26mm and fits the rim with quite and effort. The rim must be printed with very good inter-layer adhesion to ressist this. The tarmac tire must be printed solid because there is no space for any infill. Maybe you can accomodate inside a soft compound but you probably won't need it as the tire in TPU is quite hard... if you can print them in TPE or any less than 80A shore material you will probably reach a good flex result. I tested them over ceramic indoor floor and over concrete and tarmac and they slick a bit but feel quite usable. GRAVEL TIRES 69mm VOID:The Gravel tires are bigger. The numbers this time doesn't fit at all, as they are 69mm total diameter, instead of 65mm... These 69mm are maybe too much for some standard on-road cars but maybe…