tea pot warmer

Beschreibung

Tea pot warmer with cork for heat absorption Since it seems that there are different shapes and forms of tealights I decided to go with a square if you want hold the tealight in place you could put a a thin cork plate ontop the first one with a circular hole for the light and glue those two layers together Parts you need 4x M3 nuts 4x M3 cylinder head screw, length can be from 10mm to about 18mm cork (I used 5mm thick plate, use what you have around) Steps print all parts drill the holes in stands of the bottom part (I added a single support layer in the model) prepare the cork: 60mm x 60mm square cork plate for the bottom ring with outer diameter 151mm and inner diameter 100mm (I added cut helpers so you can get the circles aligned) use some sanding paper to make the cutted parts smoother put the nuts in square holes in the lower part put the top part ontop to bottom part and use the screws to fix it in place (the screw heads should be lower than the model put the cork in the center square part and the ring ontop ( use a drop of glue if it's a bit lose)