Dimitri's Lance

Beschreibung

Dangerous Ladies' 3D model for Dimitri's lance. Model by Jennifer Rezny (@quicksparrows) .stl format. Lance is proportioned to finish at 80" long, but you can change the length of your handle to adjust shorter or longer. Pre-sliced for printing on a 20cmx20cmx20cm bed or a 30cmx20cmx20cm bed. The lance uses internal dowels for alignment and strength. It calls for two 10.5" dowels with a 1/4" diameter. These can be omitted but we recommend them for durability. The lance pieces are designed to thread onto a 3/4" PVC pipe, but you can use a 1" dowel too. To get the 80" finished length, your pipe/dowel should be 62". Files include: - Reference images - 300mm printer files - 200mm printer files We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm. Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced. Feel free to tag us to show us what you print and make! We love to see finished works. http://twitter.com/dangerousladies http://instagram.com/thedangerousladies