Cyclops/Chymera E3D extruder holder with inductive sensor for K8200

Beschreibung

The holder is created to fit at K8200 T-slot and to provide a well-fixed positioning for Chimera/Cyclops extruder, developed by E3D (http://wiki.e3d-online.com/wiki/Cyclops%26Chimera_Documentation), as well as to align the inductive sensor we use for autocalibration. The assembly process is quite simple: 1) assembly the extruder itself 2) use four M3 x 15mm bolts to fix the extruder at the holder (three at the back and one above) 3) place the rail in T-slot and place the holder over it. tighten it with a pair of M5 bolts (rectangular nuts are needed) 4) place the support below, insert it to the holder's "arm" and tighten with M5 bolt 5) insert the inductive sensor (we use LJ18A3-8-Z/BX proximity sensor) to its place. for details of wiring and calibration (http://www.thingiverse.com/thing:1749570) 6) enjoy:) all the three components are attached in STL as well as in IPT. UPDATE: stronger base, eliminated mistake with upper fixator of the previous version, useful information in the bottom about displacement of the sensor according to nozzle. Feel free to post your makes and remixes!