Gryphon Full-Auto (Foam Dart Blaster)

Beschreibung

I loved the original Gryphon blaster from Flygonial and I built a pistol style as a remix. https://www.thingiverse.com/thing:3576276 As an (electrical) engineer I thought the design very well thought out and really adaptable. Compared to any nerf gun I have used, this design is way more accurate. I had been modifying Stryfe and other flywheel blasters to make them full-auto. I wanted to learn some 3D CAD so I decided I'd load up the Fusion360 from Flygonial and have a play. What I've uploaded is my modifications to allow the use of a basic TT motor as an automated pusher. It's not meant to last forever or be used in competitive play, if such a thing exists. The magwell, flywheels, rails, stock are ALL completely stock. I have only made changes to the pusher and trigged setup. I have attached the modified Fusion360 files. My skills with the tool are pretty poor. I am sure people could tweak things further. To make this, in addition to the magwell, motors etc you will need: a mini 20mm microswitch. 5A is fine. I used this: http://www.amazon.com/gp/product/B0171G7HCY/ref=ppxyodtbasintitleo05_s01?ie=UTF8&psc=1 A TT motor with one shaft snipped off. I used this: http://www.amazon.com/gp/product/B07QRQ4XQD/ref=ppxyodtbasintitleo05_s00?ie=UTF8&psc=1 A return spring. I used one from this kit: http://www.amazon.com/gp/product/B076XKY3JM/ref=ppxyodtbasintitleo01_s00?ie=UTF8&psc=1 Some wire. 22 AWG is fine as it's only for the pusher. You will need familiarity with the original design…