FDL-3 Mag Switch & Narfduino Remix

Beschreibung

FDL-3 Remix parts to allow for a mag sensor switch to be installed. The switch is the same as the pusher switches, and a generic Nerf spring will keep it in position. The mag sensor can be used for alternate control systems, such as Narfduino. The receiver and lower pusher bracket are direct replacements for FDL3 parts, and the mag switch is new. Long vs Short: Pick the receiver components to suit your build. If doing Short, you will need to ensure that the switch is travelling freely through the port. Depending on your printers bridging capabilities, this might be easy, or may require some filing. The Electronics Cover and Bay are replacement parts designed to be compatible with Narfduino and the beta Narfduino Console (3-button) v1.0. Please note that there is no power switch facility on this model. v1.1 You can use the Electronics Bay with Switch and Stock Attachment Point with Switch to have a stock point integrated switch. The switch itself is more or less the same on the FDL BOM.