Minato - LED Lightbox - NO AMS NEEDED - ACSpark3D

Minato - LED Lightbox - NO AMS NEEDED - ACSpark3D

Kostenlos STL Ordnung & Aufbewahrung
  • 23 Aufrufe

Dieses Modell wird auf Creality Cloud gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Creality Cloud ansehen ↗

Beschreibung

Minato LED Lightbox - Printing Instructions IncludedAll the necessary printing instructions are included in the file.If you have any questions, feel free to DM me!Assembly As shown in the photos above but also numbered on the STL FilesYou will need a 1mm thick glass layer or any transparent material of your choice. 195mm x 80mm x 1mmAlso, make sure to have a strip light of your choice for the lighting.For Support,Commercial Use & More: https://www.patreon.com/c/ACSPARK3DEnjoy showcasing your Minato lightbox!Note to always put the transparent layer lastLightBox Frame Settings:Layer Height: 0.2Walls: 2Bottom: 2 (Or 3 to hide infill lines)Top: 215% InfillLightBox Back Plate Settings:Layer Height: 0.2Walls: 2Bottom: 3Top: 310% InfillLightBox Transparent Layer:Layer Height: 0.2Walls: 2Bottom: 2Top: 21% InfillDesign Layer Settings:Layer Height: 0.22 Walls2 Top/Bottom3% InfillNo supports

About this model

Minato - LED Lightbox - NO AMS NEEDED - ACSpark3D is a kostenlos 3D model in the Ordnung & Aufbewahrung category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

Ähnliche Modelle