ceiling cover - petfalcon

Beschreibung

Good day all.This is a rectangular ceiling cover .My ceiling consist of 12mm gyproc panels and it looks very modern and sleek.But I want a fan in my toilet and therefore I need acces to my roof.And since we are 3d printing I did not want a boring flat plate .I want something that easily comes down end is also esteticly pleasing.The dimensions are a bit custom to the availabel room I had.So the hole in the ceiling is 330mmx380mm wide .Enough you can easily pop your head and shoulders through.You will need a wood plate of about 3 to 4mm thick .You could 3d print the middle part if you have a large enough printer .But even in western Europe these wood plates only cost a few euros (trust me it is cheaper)You will need 4x M6 x25 mm hex bolts some M3 x10 mm hex bolts and some smal woorscrews +-10mm long.The screws and M3 hex bolts are optional if you like glue.(you need to use glue on the M6 bolts anyway.And a saw to make the hole in your ceiling.Have fun.