Nozzle box

Beschreibung

ender v3 se nozzle box with 22 placements and tweezers to grab the nozzle out of the box.this was a fun quick 10 minute model that turned out to be extremely practical for holding nozzles.important pointers-this model worked perfectly first time with a 0.6 nozzle extruding petg with the layer hight of 0.35 , i was able to close the lid in a smooth manner, of course running a (0.6mm) with petg will result in a slight quality drop.therefore my recommendations are to use a (0.4mm) nozzle with a layer hight of (0.16 - 0.2)scale down by 1 or 2 mm to ensure a snug grip on the nozzlesps left it standard to ensure the nozzles were slightly loose and easier to get out with the set tweezers in the print.enjoy a lovely day thanks for coming across this model !