LPVO Killflash / Scope Protector

Beschreibung

I have designed this Killflash to act as a disposable scope protector as well as acting as a kill flash. The Killflash is a secure press fit but is removable for replacements. If you are worried about it falling out, you can use a scope cover to trap the kill flash in place. I have modelled the kill flash on my VictOptics S6 1-6x24 LPVO. However it should fit on most 30mm tube diameter LPVO's. I have tested the design landing at a hex depth of 8mm. The testing used a 2.2J sniper with 0.48g BB's point blank, with both designs failing on the forth shot in the same area! Testing is available: https://imgur.com/a/HaxcKCz I would not recommend upscaling the model due to the large size of the hex, however downscaling should work with smaller scopes. Disclaimer; Always wear appropriate eye protection when handling airsoft replicas. Replace killflash after being shot or extended periods being exposed to sunlight and the elements.