Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger

Beschreibung

Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger This triggers the Auto Cancel feature for the Turn signal stalk, similar to what is shown in this youtube video (https://youtu.be/6kAldZCjieg?si=Vc8oC_EFhBl4sKFx) The video shows the QR2 which has a much wider diameter than the QR1, so simply attaching the included piece of plastic to hit the auto cancel trigger wont work. This has a 59mm inner diameter which is the same diameter of the QR1's outer diameter, so a little shaving, sanding, or (what i highly recommend) heating might be needed to get it to fit. I used a heat gun to warm it just enough to slip onto the QR1. If you do the latter, its pretty much friction fit and wont slip, but will be semi-permanent. I made one with a 60mm inner diameter, but that was too loose. If this gets enough attention and demand, I might just redesign it and really dial in the inner diameter so that it is still a friction fit but also so its easier to remove. Please feel free to remix