Bookmark Loki

Beschreibung

!!! READ THIS BEFORE YOU DOWNLOAD THE BOOKMARK!!! !!! INSTRUCTIONS BELOW!!! A unique bookmark for lovers of Loki, the god of mischief and Marvel. Gift your loved ones who love to read and make them happy. Or print the bookmark for yourself. Bookmark size: 60 x 190 (x 0.5) mm INSTRUCTIONS After downloading, you will find four .stl files in the folder. Each for one colour of filament. The bookmark was printed on an Eder 3 printer with a glass bed, so the 3D design of the bookmark was adapted to this. The printer does not support multi-colour/multi-material printing. However, with a combination of human ingenuity and functionality from the hop, it can be done as well. If you don't have experience with this feature, I recommend watching some videos on how to print multiple colors using z hop. Like I urged for the Doctor Strange bookmark: https://cults3d.com/en/3d-model/gadget/bookmark-doctor-strange Simply put, the idea is to print each color separately, without moving the print bed where the color is already printed. At the same time, the two parts need to be aligned well in the slicer so that everything prints exactly where it should. Remember to set the z hop to a height higher than the print height (at least 0.8 mm). And of course be careful when changing the filament by hand. When everything is done correctly, the result is very satisfying. Good luck, may the bookmark make you happy!