Customized Sorting Boxes Compatible with EuroPlus System

Beschreibung

Customized Sorting Box InsertsIf you have an abundance of small screws, nuts, and electronic components, you understand the challenge of efficiently organizing them. When searching for inserts, I encountered the EuroPlus sorting tray system but found the smallest insert was still too large for my needs.To address this, I designed my own inserts. Halving the base measurements for length and width, my smallest tray is now only 1/4 of the original size, significantly improving space utilization within the inserts.To ensure stability within a drawer, I created a special grid. Placed at the bottom, the grid accommodates corresponding patterns on the inserts' underside, securing them in place. These inserts can also fit into a EuroPlus sorting tray.Features:Compatible with EuroPlus sorting tray systems (H: 45 mm).Each box includes a space for labeling, located on the short side of the box.The size of a 1x1 box is 54 x 54 x 45 mm (W/D/H), similar to the EuroPlus Insert Box 45/1.The filenames have lost the decimal point notation: 'Insert_10x15s.stl' means 'Insert_1.0x1.5s.stl'. The 's' suffix indicates that the label space is on the short side of the box.Feel free to let me know if you need more boxes in different size combinations. Should I add versions where the label area is placed on the long side of the box?Angepasste Einsätze für SortimentskastenWenn du auch eine Vielzahl von kleinen Schrauben, Muttern und Elektronikbauteilen hast, kennst du das Problem, sie ordnetlich zu…