Pump-Action Repeating Crossbow

Beschreibung

My take on the Sliding Legolini. Prints in much less time and doesnt require any springs. Only requires some rubber bands, a PVC pipe and M2, M3 and M4 screws and nuts. It has a lower draw weight so this is somewhere in between a toy and an actual crossbow. This is an original design that was inspired by the Sliding Legloni and is not compatible with any parts from that model. Magazine fed (5 rounds in the mag + 1 in the chamber). Magazine is reloadable and removable and by using the included part, can be extendable to hold as many bolts as you want. The crossbow is compact (overall length of ~15in / 38cm) and pump-action, capable of firing in rapid succession. The included arrows are fully 3D printable and can be printed at 2 arrows per hour. Apologies for the broken text formatting, its a Thingiverse bug. Should appear correctly on the mobile app. Video at the bottom DISCLAIMER: By downloading these files, you agree that I shall not be liable for any damage, injury or harm resulting directly or indirectly from the use of these files or instructions. Always be safe and aware when operating these mechanical toys and enjoy!