MST FRX Cable Raceway kit

Beschreibung

This is a kit that allows you to cleanly guide and conceal your wire where it matters the most. The kit includes the cable raceway that accepts up to 12AWG silicone wires, one smooth back cover to install electronics, one decorative front cover, and a wire guide that bolts on top of the upper deck. Note that the wire guide that bolts on top of the upper deck should have the wires run through the guide before installation. Each covers of the wire raceway kit require M2.5 countersunk screws no longer than 5mm and the wire guide requires one M3 countersunk screw to be used in the factory location, and an M2.5 button head screw to be used from underneath the upper deck.