Mac Studio Stand , Raiser

Beschreibung

I searched most of the designs, and they're about dust and etc. I need 40mm height to be able to hide the external storage and hubs under it. Also, the goal was to be able to print it in less than 2 hours. You can edit the CAD on Onshape. Feel free to modify it as you need. https://cad.onshape.com/documents/af6e19cbe677f5fe20ce4543/w/05dbabccccde3d7c02e7844b/e/6188ab6ff3486f4e4e731bc9?renderMode=0&uiState=69543eaf377e14429f24890c As for settings, I printed with PLA, 0.4 nozzle, and 0.2 layer height. As you know, with a large area, Z offset is really important—at least in the top 5 layers. So, I just printed 1 layer wall on the bottom with 0.2 mm and 1 mm for top surfaces. its ±60 ~ 70 gram