Buffalo Horn for Motorcycle Helmets - Accessory

Beschreibung

Horns created to be used in most helmets, may not fit all the models, since the helmets curves are not universal, but most helmets may fit well or with small adjusts. Place them with some strong glue or double-sided tape (use strong ones, preference to originals) Complete Version - Size: 198x90x54mm Sliced Version - Biggest part size: 166x70x53mm If you are having difficult in printing, I included a third version with flat faces, sliced in half, which will be very easier to print and you can glue to assembly. IMPORTANT: There are two kind of files included: - Complete Version - Sliced Version The difference here is that the complete version, is to be used if you'd like to print as a single piece, but note that it will require way more support, and its harder to print due to curved surfaces. The sliced version, is sliced in a part that gives one flat face, to be easier to print. Depending on your printer, it may still require some support, but way less. The sliced version includes a rectangle connector to be easier to glue. Also, the sliced version may fit better some printers due to reduce the maximun size of the printing piece. About resizing: feel free to resize, but note that it may interfere in the curvature of the fixing part on helmet.