Turtle

Turtle

Kostenlos STL Sonstiges
  • 24 Aufrufe

Dieses Modell wird auf Creality Cloud gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Creality Cloud ansehen ↗

Beschreibung

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. It is possible to print without masterial system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. The Model is 150x150mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. ou may print at higher layer heights below the Base Thickness of 0.56mm. The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm. Filaments Used:PLA ****** + Black Transmission Distance: 0.3PLA Sunlu META Grey Transmission Distance: 3.6PLA ****** Basic White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreyAt layer #15 (1.28mm) swap to White for the rest.

About this model

Turtle is a kostenlos 3D model in the Sonstiges category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

Ähnliche Modelle