Honda Bumper Retaining Clip

Beschreibung

Replacement retaining clip for the front bumper side spacer/retainer bracket used on the 2005–2010 Honda Odyssey.This clip is for the small retaining insert used with the Honda front bumper side spacer brackets:71198-SHJ-A00 — Left front bumper side spacer/retainer71193-SHJ-A00 — Right front bumper side spacer/retainerThe OEM Honda spacer/retainer brackets normally include these small clips, but many aftermarket replacement brackets sold online do not include them. The original clips also become brittle with age and can easily break when removing or reinstalling the front bumper. This STL was created as a replacement for those missing or broken clips so the bumper side bracket can be reused instead of replacing the entire bracket assembly.I printed mine on a Bambu Lab X1C using PETG at 100% infill. PETG is recommended over PLA because this part is used in an automotive exterior area where it may be exposed to heat, vibration, flexing, and outdoor conditions.Recommended print settings:Material: PETGInfill: 100%Printer used: Bambu Lab X1CSupports: Use if needed based on your chosen orientationPost-processing: Light cleanup or sanding may be needed depending on printer calibrationBefore final installation, test fit the clip in the bumper side spacer/retainer bracket and confirm proper engagement with the bumper cover. Small adjustments may be needed depending on printer tolerances, material, and shrinkage.This is a DIY replacement part and is not an official Honda part. Use at…