Model Railway - Cable Drum Jack and Stand by Peter Darton

Beschreibung

Cable Drum Jack and Stand. There are two versions: Jack and a Stand.These have been designed to go with my other items of Cable Drums, but this download also includes the 2m and 1.6m drums with cable, and a bar is also part of the design, so the drums sit on the Jack or Stand. For my other cable drum designs, use the following link.https://www.myminifactory.com/object/3d-print-model-railway-cable-drums-with-and-without-cable-814563 These items have been designed at OO gauge, 1/76.2 scale.For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale). Examples in the photos were printed on an AnyCubic Photon Resin Printer I recommend printing these items on a 3D resin printer to get the best resolution print, for larger scales you might be able to print them on a filament printer (Not tested). As normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the model's design too much. The main resins I use for printing can be found with my affiliated links below.I use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher. AnyCubic ABS-like Resin https://amzn.to/3yRjgu4 (Amazon)AnyCubic Water Washable Resin https://amzn.to/3T3MgFY (Amazon) Please check my Website…