Pocket Master Silicone Toy Mold

Beschreibung

Pocket Master Personal Silicone Wank Toy Mold Its the perfect travel companion... Thinner, leaner, and full of sensory bumps and tight collar pass throughs to push you over the edge. Sometimes discretion is the best policy. This mold produces a silicone sleeve that is lined will all sorts of feel good obstacles for you to work your way in and out of. It's ribbed and collared and all there for one purpose... Maximum pleasure on the go. Lube it up with your favorite water-based lubricant and find a nice comfortable spot to work some magic. This mold includes one insert (I might add some more in the future, but I am trying to keep this one simple). The internal structure is mirrored on the outside of the sleeve to give you a better grip when lubed up, and it adds a little more tension to sides when using softer silicone. You are in control and with the thinner sleeve, you can feel every movement. Prints easy with no supports or brims needed. If you need a bigger or smaller size, you can resize / scale the mold and insert. All parts must be kept at the same ratios or they will not fit together correctly. The Mold I found that the mold is best printed in PLA for smoothness, but PETG works as well if you want a stronger mold for many repeat uses. I printed this on a Bambu PS1 using a .20mm layer height with a .4 nozzle. If you want your final product to be smoother, try a smaller layer height and/or use adaptive + smooth layer height. The inserts are very detailed with lots of…