Psy-cho 90mm 150+MPH Jet

Beschreibung

The Psy-cho Jet weighs 5.5lbs and has 12+ lbs of thrust! Its quick and easy to print. Super simple to assemble and flies really easy until you press the throttle forward. This is a VERY high performance jet designed to carve up the sky like nothing you've flown. This is not a toy. You should have some fast EDF jet experience before you fly this. I recommend taking full care and please be responsible. Printer or builder error could cause a catastrophic crash. Use good judgement like any other high speed airframe. Wing span 37” Length 36” with thrust tube Maiden Flights https://youtu.be/L1nvIeLuQ5U?si=BuAlA0xQ4HHU0GUL More Flights https://youtu.be/-i-LbSV5FM4 Parts Needed: I'll link the parts I used in my build to achieve 150+ mph Any 90mm https://www.motionrc.com/products/freewing-90mm-12-blade-edf-8s-power-system-w-4075-1350kv-inrunner-motor-e72215 120+ amp ESC https://www.motionrc.com/products/freewing-120a-esc-with-8a-bec-and-reverse-thrust-function-102d002001 Any quality 17g servo MG https://a.co/d/gK7bKTB Any 10mm carbon spar 500-570mm will work fine https://a.co/d/d5GOcjA any 4-5000mah 8s lipo.I used https://www.smc-racing.com/index.php?route=product/product&path=67211&productid=765 2mm pushrod https://a.co/d/h0VjZ6M CA glue to build the airframe Hot glue for the EDF and Servos and thrust tube Velcro (two strips) for the battery and ESC Assembly tips: 1. Use enough medium CA glue for all the butt joints. dont skimp on this one. After the joints area all dry, go over…