Vortex Illusion Hueforge

Beschreibung

A flowing monochrome vortex design that creates a sense of motion and depth from every angle. The sweeping ribbon-like curves pull inward toward the center, giving this Hueforge a modern abstract appearance that stands out in offices, gaming rooms, studios, or minimalist spaces. The layered grayscale tones enhance the illusion effect while keeping a clean and mature aesthetic. The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.