Spaceballs Blaster

Beschreibung

From the movie: Spaceballs, the rifle/blaster. This is a highly detailed 1:1 replica (or as close as I could get it). If you require the raised lettering to be removed for easier printing, let me know. The sling ring in the back is, most likely, not strong enough for it to be slung over the shoulder, so if you're going to use it for cosplay, go on eBay or Amazon and buy a metal sling ring and screw that in. If you require a helmet to go with this, consider mine. https://cults3d.com/en/3d-model/fashion/spaceballs-radar-tech-helmet There is no list of materials so please review the instructions and make a list of what is necessary. Brass tubing, rods, magnets, and a short length of 1/2" Copper pipe (sized to American standards) will be required. I have designed the parts with tight tolerances. This is not a model that is print and put together. Post processing will be necessary not only for assembly, but if done properly, will make a convincing replica. All printers, slicers and filaments have different properties, so it may be necessary to use sandpaper, files, rasps and drill bits to ensure parts have a good fit. Test fit all parts before assembly.