Multi modal soap box

Beschreibung

Multi modal soap box This soap dish is designed for three areas on the body, for which separate bars of soap are used. Two foot containers can be removed and moved for convenience, if it is not convenient to place the entire base near the water. It can also be glued if there is no need to remove the small box. I will add the cura settings files. Because several specific print modes were used. You will need 0.2 and 0.4 mm nozzles. I think everything can be printed and 0.4 mm will just have to be polished. Unfortunately, I can't show the assembly, I don't know much about gif animation. The most difficult thing is to insert a screwdriver into the cut of the hinge and put it on the pin. Do not see that different printers are used, this is so as not to change the settings every time