Pendant lamp 8

Beschreibung

This pendant lamp is designed to be hung from the ceiling, supported by an electrical cable connected to the bulb. It is compatible with the IKEA Hemma E27 cord set (link below). A shade ring is not needed, as the cord grip fits directly into a 3D-printed holder. This holder can be printed as a separate piece or integrated into the lamp design (though support will be required for integration). If you plan to use the IKEA Hemma cord set, I recommend printing the holder first, then printing the lamp either as one assembly or with the holder and lamp as separate pieces. If you have a different type of cord grip for your pendant lamp, you can send us the cord grip dimensions, and we can redesign the 3D-printed holder to fit. Note that the cord grip will not lock into the holder. You will receive 2 type of file: -2 STL files - main body and bulb holder, printed at overall dimensions 223X195X218 mm. Distance between the 3d printed holder (cord grip dimensions not included) to the bottom of the lamp is ~200mm. -an assembled version Weight min. 200 g Tested with a LED light with an overall height of 120mm (from the base to cover). Use only LED light! Supports are required for several regions Keep the printing speed lower to avoid artifacts. https://www.ikea.com/gb/en/p/hemma-cord-set-white-10386577/