Flexi Skeleton Dragon

Beschreibung

Ever wanted a little dragon for Halloween? here it is, a little skeleton dragon that you can position as you wish, it's so little that it even fits on the A1 mini build plate! you can upscale it as much as you like, but I do not suggest downscaling unless you're printing with resin it prints in two separate parts, the head and the body: Settings and printing tips -the whole print will take about 7 hours depending on your printer -i suggest using a brim -take it slow on your first layer, i used 15-25mm/s -you may wanna use "z-hop" to avoid the nozzle hitting the print -if you have poor bed adhesion try printing the "wide ribs body", it will ensure that the first layer sticks even better! -the head must NOT be rotated, print it with organic/branch supports as it is -on the body do not put auto generated supports, instead add supports manually, but only on the ball joint that will click on the head - once finished printing remove supports and pop the head on the body... and you're ready! now you can go have fun with your little dragon... but be careful... they may bite! :)