Zenless Zone Zero Game Keychain

Beschreibung

Zenless Zone Zero game keychain This keychain depicts the Zenless Zone Zero game logo. It is designed in Fusion 360 and features a ring hole at the top. Dimensions Height: 36 mm Width: 31 mm Depth: 3 mm Printing instructions It is recommended to print with a 0.4 mm nozzle. Layer height should be 0.2 mm or less. **Supports are not required. Mounting instructions Place both models in the laminating program. Rotate them so that the letters are on the base. The base should be on top of the letters; be careful and check that they fit correctly. Print the letters first and then the base so that everything prints in the same place and stays together when you remove it from the bed. ** Leaves the file ready to print (PrusaSlicer). ** Additional information This model is available for free download on Thingiverse. Zenless Zone Zero Game Keychain This keychain represents the logo of the game Zenless Zone Zero. It is designed in Fusion 360 and features a hole for the ring at the top. Dimensions Height: 36 mm Width: 31 mm Depth: 3 mm Printing Instructions It is recommended to print with a 0.4 mm nozzle. The layer height should be 0.2 mm or less. No supports needed. Assembly Instructions Place both models in the slicing program. Rotate them so that the letters are on the base. The base should be on top of the letters; be careful and verify that they fit correctly. Print the letters first and then the base, so that everything prints in the same spot and stays together when removed from…