Bullet Pixel Soffit Track

Bullet Pixel Soffit Track

Kostenlos STL Sonstiges
  • 11 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

This Bullet Pixel Track is designed to fit into the groove of a standard soffit groove. Pixel Spacing: 2" Pixel Orientation: Downward & Forward Update 9/20/24 The overlapping soffit grooves were causing the spacing to be shifted over a long distance. This means the exact locations of the groove inserts on the track couldn't adjust to the shifted grooves. So I removed the groove inserts and added clips that can be used anywhere on the track. I also added various sizes in 2" increments. Update 7/10/24 -Downward track now has: •Thicker bottom wall •Thicker pixel holder •Stopper tabs on groove inserts •5" & 6" groove spacing versions -Forward track now has: •Counterbore with clearance for pixel pliers •Groove for wires •Stopper tabs on groove inserts •5" & 6" groove spacing versions

About this model

Bullet Pixel Soffit Track is a kostenlos 3D model in the Sonstiges category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle