Slashed by Stlflix

Beschreibung

Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform! Click here to join STLFLIX Slashed This STL file is recommended for FDM Printers!3D Printing Time: 1 Day 10 Hours and 17 MinutesApproximately Height: 24cm This guitar player was definitely bone to be rock and roll! Assembling Instructions: Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY.Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards.From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside.Attach GEAR_4 onto the pin of BODY.Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8.Place GEAR_6 on top of GEAR_4.Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video.Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin.Attach CHEST_ELIPSE so that the inner diameter touches GEAR_7, as shown in the video.Fit CHEST_ELIPSE_SLIDER below CHEST_ELIPSE, in its designated space.Finish by attaching and gluing the remaining parts, following the assembly from the video. COPYRIGHT & SELLING RIGHTS This STL file is copyrighted by STLFLIX©, the Ultimate STL…