Gnome with low hat - The Gnome Zone

Beschreibung

PLEASE CHECK OUT MY FULL MODEL COLLECTION FOUND HERE ON CREALITY CLOUDhttps://www.crealitycloud.com/collection/3d-model-collection-NwpvCaYou will need supports to print this model and I highly recommend light tree supports as I have had success with them. Fun to paint with and an easy color scheme make this print a joy to complete. Please post a make if possible. It really "Makes" My day. Remember a Happy Gnome is a Happy Home.This is very important please note.Tools you may needPaint and brushes ( artist fine set should work) You will pluck bristles until the desired width is met so get quite a few.Painter's mixing board (or some stiff cardboard works great)Desk Mounted magnifying glass This is a must for fine work.Desk-mounted part holder (grip style large enough to hold your model for you while you paint). this is HIGHLY recommendedI use a super tacky primer before painting and I use acrylic paints for the most part, but this is up to you(I often use nail polish as well)Printing Slicer Software Creality PrintPrinter Crality K1Material Hyper PLANozzle .04 @ 215Bed 55Layer Height .2Speed 100mm/ (K1)Supports YesScan Ferret Pro can be purchased herehttps://store.creality.com/products/cr-scan-ferret-pro-3d-scanner?spm=..page_11427365.header_1.1&spm_prev=..login.header_1.1Scan Lizard can be purchased…