500m Primer Spool Set

500m Primer Spool Set

Kostenlos STL Sonstiges
  • 19 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

Prototype of a model primer coil for reflectometric measurement of optical fiber. Printed in PLA for testing. 10x10x3cm This model is designed for 500m bare spools with dimensions : 55mm inside diameter 65mm outside diameter 21mm height Requires a pause at layer 93 to insert an SC connector in the slot provided. A bit of glue between the storage cassette and the lower cylinder that fits into the bare coil. Two 2.5mm M2 plastic screws are required. Be careful not to use pointed heads, as this may damage the bare coil. Use a file to reduce the length if necessary.

About this model

500m Primer Spool Set is a kostenlos 3D model in the Sonstiges category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle