M8 nuts - popeye the sailor ma

Beschreibung

Fasteners included:Hex nutJam nut (a thinner hex nut)Cap nut (has a dome on top, also known as an acorn nut)Thumb nut (nurled edge for hand tightening)Square nutWing nutCoupler nut (long nut for connecting two threaded rods together)Lock washer (raised teeth attempt to prevent screws from backing out)Small washer (little outer diameter)Standard washer (published standard outer diameter)Fender washer (large outer diameter)Dowel pin (cylinder with beveled ends)---Features:Can build a full set of fasteners with just one setting, but there's lots of overrides and adjustments available if needed.Select from standard U.S. and metric sizes -- no need to look anything up in tables or convert units.Adjustable tolerances to get the fit right for your printerAll fastener specifications match published standards and are therefore interchangeable (well, except for being made of plastic).All hex/square nuts have subtly rounded corners so they fit easily into standard toolsInstructionsIf the uploaded parts come out too loose or tight, download the OpenSCAD script, load it into OpenSCAD, and adjust the tolerances. See comments on the tolerance fields for details.If you need something weird, you can play with the overrides as well in the script.