Pod Racer

Beschreibung

Based on a single photo of this crazy concept I decided to give it a try. I loved the idea of a pod racer style layout with twin tail booms. Designing prop planes is a little out of my comfort zone but it was fun and proved to be a very fun little plane to print, assemble and fly. The plane doesn’t have any bad characteristics at all. Easy to hand launch and easy to land Maiden flight https://youtu.be/bJUEuAK66os?si=XsDo3HOE_Aacl6y7 Final flight Pod Racer! Files available https://youtu.be/bSw1mrJnUfc Parts needed: 4x 9g servos Servo extensions Any motor in this size category https://a.co/d/0dTlywPz I was not using the recommended prop. A folding prop sized for this motor would be ideal Any 30 amp ESC I used a 2200 3s lipo for proper balance 1.2mm push rod Velcro for the battery and ESC All up flying weight 700g Wing span 39”