Pyramid Stacker by Muzz64

Beschreibung

The Pyramid Stacker is angled to the same dimensions of a real Pyramid. It's a series of easy prints that creates a multi-layered storage solution able to accommodate all sorts of small things up to quite large things if you have a build plate big enough to print the larger / lower layers (L4/5). build plate sizes required for the various layers are provided below. Just print up to the layer that your machine can accommodate. This is a versatile storage solution with a unique look. Great for everything ranging from jewellery through to electronic parts, cables, Lego and other small toys/models, tools, parts and much more... as you would expect with a storage solution of this shape store the smallest things near the top and larger things lower down. As the layers snap together (if well printed on a precise accurate machine) there is a small tab on one of the four faces of each layer to help with opening / separating the layers to store items away and / or get to the items already stored inside. The critical thing required to get a great result is clean prints with a nice flat base. Good build plate adhesion for larger / square prints is important. A range of configurations (options) is provided. Choose from a single open space within the layer to having he layer divided onto 2 or 4 equal 'chambers'. Each layer is 30mm in height. For example, to make a 3 layer Pyramid Stacker, print the top (L1), make the next layer down with a divider into 2 chambers (L2-2) then your bottom…