Case // Case

Beschreibung

Case with flexible lid. It is designed to be printed with PLA or PETG, in my case I have printed it with wood filament. I have also made a drawing of a samurai to print with the same or another color, in case you want to put it on top of the cover. I have designed four versions, one to hold 832mm rectangular magnets and the other for 4mm diameter and 2mm deep magnets. In my case I have placed them by pressing with a clamp and without the need for glue, you can use it if you need it without problems. The other two versions of the boxes, their differences are that they have more tolerance, in case you have more problems with them. //////////////////////////////////////////////////////////////////// Case with flexible lid. It is designed to be printed with PLA or PETG, in my case I have printed it with wood filament. I have also made a drawing of a samurai to print with the same or another color, in case you want to put it on top of the lid. I have designed four versions, one for placing rectangular magnets of 832 mm and the other for magnets of 4 mm diameter and 2 mm deep. In my case I have placed them tightening them with a clamp and without the need of glue, you can use it if you need it without problems. The other two versions of the boxes, their differences are that they have more tolerance, in case you have more problems with them.