Volvo OBD Reader

Volvo OBD Reader

Kostenlos STL Sonstiges
  • 20 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

Slim casing for OBD 1.5 diagnostic reader for old Volvo Does not matter which pins you choose. I chose 9-12 because my soldering iron destroyed pins 1-4. Uses 2 x M3x10 countersunk screws and M3 threaded inserts. IFAC = Ignition, Fuel, ABS, Cruise READ CODES: hold button ~2 sec. RESET CODES: hold button 5< sec, LED lights up, hold button another 5< sec. Parts needed: 5mm LED OFF-ON button (max 7mm diameter) rotary switch 1 pole 12 way non shorting (max 26,7mm diameter) OBD2 male connector wire STEP files included for easier modification. Wiring diagram provided.

About this model

Volvo OBD Reader is a kostenlos 3D model in the Sonstiges category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle