Barix Instreamer Rack-Bata

Beschreibung

This is a remix from the half rack by rqdsvw This is a 19 inch, 1RU rack for my Barix Instreamer audio IP encoders. The official Barix rack shelf is prohibitively expensive. I will have later revisions as I fulfill my todo list below. This is a beta as I am not sure how I can print this in sections on my AnyCubic with a 10inch print bed. Right now this is a concept and place holder. I will try to add a lap-joint that will be glued for stability. There are 2 uploaded files. Barixrack. and barixShort Barixrack is the 1/2 1RU rack from rqdsvw and spliced together with a 1inch joiner. That thing is 4.5 inches deep. Barixrack - short is a shorter depth at 3 inches. This is the depth of my instreamer units, So there is no additional wasted depth. Todo Add lap-joint to facilitate printing on small printers add an extension to accomidate a 4port 12v to USB adapter - https://www.amazon.com/gp/product/B08MCZNYZN/ref=ppxyodtbasintitleo04_s01?ie=UTF8&psc=1 Add holes to accomidate hardware for T-slots on the bottom of the instreamer units to secure them to the rack