wittycloud case by Edwin Ringersma

wittycloud case by Edwin Ringersma

Kostenlos STL Mode & Schmuck
  • 13 Aufrufe

Dieses Modell wird auf MyMiniFactory gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf MyMiniFactory ansehen ↗

Beschreibung

Case for the ESP12F mini nodeMCU Wittycloud ESPHome config: esphome: name: wittycloud1 platform: ESP8266 board: d1_mini wifi: ssid: "wifissid" password: "wifipassword"binary_sensor: - platform: gpio name: "WittySwitch" pin: 4sensor: - platform: adc pin: A0 name: WittyIlluminance unit_of_measurement: luxlight: - platform: rgb name: "WittyRGBLights" red: output_component1 green: output_component2 blue: output_component3 # Example output entryoutput: - platform: esp8266_pwm id: output_component1 pin: 15 - platform: esp8266_pwm id: output_component2 pin: 12 - platform: esp8266_pwm id: output_component3 pin: 13 - platform: esp8266_pwm id: onboard_led pin: number: D2 inverted: true # Enable logginglogger: # Enable Home Assistant APIapi: password: "apipass" ota: password: "otapass" | Download free and paid 3D printable STL files

About this model

wittycloud case by Edwin Ringersma is a kostenlos 3D model in the Mode & Schmuck category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.

Ähnliche Modelle