SquircleBowl10

Beschreibung

This design is a combination of a prior one and an updated version of Squirclebowl 1 (https://www.thingiverse.com/thing:3047912) and the surface morphing method I've used on a number of different designs. The actual definition for this is 40% larger, but I scaled it down by a factor of 60% to make this smaller print that would require less printing time. It printed in just over 8 hours using a print speed of 130 mm/sec and layer height of 0.200 mm. If you want a larger (or smaller) version simply scale this STL file to suit your needs.