SCX6 Plow

Beschreibung

SCX6 plow Working video included in zip. I have designed this plow for the SCX6. The blade reaches a size of approximate 15.5 (+/-394mm) wide. If you want to print one solid blade it would required a 400mm build volume. However, I have added 2 piece blade and blade mount files with 2mm x 202mm support lines. This will allow you to print in two separate files, insert (up to) 1.8mm steel rod in each hole, and glue together. The steel rods are to ensure the glue join will hold. I recommend Bob Smith Industries CA glue and it should hold well with this, but the steel rods will ensure that there is minimal flex and break around the join. The arm, blade, and blade mount all have files to allow for steel rod inserts as additional strength. Suggested filament: PETG, ASA, ,ABS, PLA-ST. PLA-ST is "Super Tough" but it has a high flex to breaking point. I find it stronger (for my needs) than PETG, but is MUCH easier to print. Shopping list: Bolts - M5 x 30mm - 4ea - connects blade to mount - M4 x 20mm - 1ea - connects blade mount to arm - M3 x 20mm - 4ea - - 2 servo arm to blade mount - 2 bumper mount to arm hinge - these will be longer if adding optional axle support - M3 x 18mm - 7ea - 2 per shock tower, 2 for servo arms, 1 for winch pull - M3 x 12mm - 2ea Screws - M2 x 12mm - 2ea - 4 for bumper mount supports - M2 x 8mm - 2ea - 4 for winch mounting plate Shocks - 2 - I have been using 70mm thru 98mm spring shocks for testing, not dampeners - internal suspension shocks won’t work…