Lithophane Light Box

Description

Lithophane Light Box that holds 4 photos. I designed this to print with the least amount of parts and to allow the photos to be changeable. I used 3dp.rocks (http://3dp.rocks/lithophane/) to create the lithophanes. I modified the pictures to be square before uploading them to 3dp.rocks (http://3dp.rocks/lithophane/). The settings I used are included in the images for this thing. I printed my lithphanes standing on edge with a brim. Printing the lithophanes on edge allows you to print with more detail than printing laying flat on the print bed. My lithophanes were printed with Hatchbox White PETG (https://smile.amazon.com/gp/product/B014VM9724). The LED lights I used are LE 16.4ft LED Flexible Light Strip (https://smile.amazon.com/gp/product/B00HSF65MC). I used Gxilee Power Supply (https://smile.amazon.com/gp/product/B01FXF6AEQ) to power the LEDs because it has an inline power switch that allows the light to be easily turned on/off and it comes with a Female DC Connector. Update 6/7/17 Added LightBoxBodyv2.stl which combines the bottom and body. Now it is not necessary to print both the bottom and body. You can just print LightBoxBodyv2.stl and LightBoxTop.stl. Update 12/17/17 Added LightBoxTop_v2.stl that could hold a 5th lithophane. I have not printed this file, so I do not have a recommended print orientation or support setting for this file.